The Ultimate Rack for your ATV and Quad Transportation
The ATV Ultimate Rack
for Transporting your ATV and Quads with your Truck and/or Pickup
Another Easy Mobility answer for transporting
your ATVs or Quads
Your Short Bed or Long Bed Truck / Pickup can be the
Ultimate ATV and Quad Carrier
NO Trailer needed to transport up to 2 Quad
with your Pickup Truck
1. The ULTIMATE RACK
ULTIMATE RACK in your Pick-up
3. ULTIMATE RACK loaded and ready to go...
It REALLY is that
Products will be
shipped to the ABF or Con-Way terminal nearest your location.
For a list of ABF Terminals near you, visit
ABF Common Carrier Terminal
Residential / "Doorstep" Deliveries require $35.00
What are some of the many features and benefits of the ATV / Quad ULTIMATE RACK?- Read on, and see below...
With the ATV and Quad ULTIMATE RACK you can ...
||Click on any image
below to view as a
larger image in a separate window
carry two ATVís on your pickup truck
- pull a trailer or use a Tilt-a-Rack product while carrying two ATVís
- use the bed space to store gear or cargo
- install the rack in minutes by yourself
- disassemble the rack in minutes for easy storage
The Ultimate rack does not rest on the bedrails of the truck.
The rack has 10-foot long ramps.
The ramps store on the rack under the loaded ATVís.
The rack and ramps are made of steel and aluminum.
The rack and ramps are powder coated black with an orange peel finish.
The rack carries any configuration of two ATVís currently sold.
The ATVís face forward, saving fender damage caused by wind.
The ATVís face forward conserving fuel while traveling
What are the racks made of?
Ultimate Racks are fabricated out of 2-inch tubular steel.
The stationary joints are welded. Joints requiring assembly are
connected with 1/2-inch, grade-5 bolts and ny-lock nuts.
The tire pans are 1/8-inch diamond-plated aluminum. Ramps are
constructed of 1x3-inch tubular steel, with rungs of 1x1x1/8-inch angle iron.
How much does an Ultimate Rack weigh?
A fully assembled, short bed rack, without ramps, weighs 197 lbs. The long bed model weighs 222 lbs.
Can one person install or uninstall an Ultimate Rack alone?
Yes. The rack is easily installed by one person. However, it is a good
idea to have someone with you in case you need assistance.
How long does assembly take?
will take about 30 to 40 minutes to put your rack together. All necessary
hardware is provided to you.
rack is assembled using ten 1/2-inch diameter grade-5 nuts and
bolts, and four 1/4-inch diameter grade-5 nuts and bolts.
Are any modifications to my truck required?
Not Necessarily. But in order to secure your new Ultimate Rack into the
bed of your truck, you will need to attach four D-ring and
swivel-bracketed plates in the corners of the inside of the truck
bed. They are provided in your hardware package and we highly recommend their use.
Not all trucks provide the appropriate tie downs for safe and proper
installation of the Ultimate Rack. This step takes approximately 30
minutes, and is a one-time procedure.
Complete instructions are shipped with the rack.
How do I install my rack
into my pickup truck?
the assembled rack standing on end, pick it up by the rear end and,
using the tailgate as a fulcrum, slide the rack into the truck bed.
(This can easily be done by one person.) Using the four turnbuckles
provided, secure the Ultimate Rack to the truck bed.
Can I install an Ultimate
Rack if my truck has a plastic bed liner?
Yes. However, minor modifications are needed in order to expose the D-ring and swivel
brackets. This can be accomplished by using a 2-inch hole saw or a
What is the angle of the
ramps when attached to the rack?
degree of angle varies with the height of your truck bed. If the top
of your truck bed is at five feet, the angle of the extended ramps
will be 30.67 degrees.
How do I load my ATVís on
minimize the ramp angle whenever possible. Position your truck so
that the rear end is lower than the front. A driveway approach or
similar depression works well. With the ramps pinned in place,
simply drive your ATV up the ramps onto the rack. Be sure to secure
it with a tie-down strap, front and back. ALWAYS wear a helmet when
loading or unloading your ATV.
How do I unload my ATV?
Follow the loading procedure in reverse.
the ramps stored when not in use?
The 10-ft.-long ramps, when folded, store conveniently on the rack
platform under the loaded ATVís, leaving the bed of your truck open for storage.
How do I secure my loaded ATVís to the rack?
There are four 3/8-inch steel loops, two on the front and two on the rear
of the rack. Use tie-down straps to secure the ATVís to these loops.
We suggest using extra tie-downs on each ATV, just in case one breaks.
How does a fully-loaded rack
affect the way my truck handles?
truck will handle as if you were carrying a small camper. The weight
of the ATVís is transferred through the frame of the rack to the bed
of the truck. No part of the Ultimate Rack touches or rests on the
bedrails. This allows a more stable ride than you would get with a
side-loading carrier, as most side-loading racks rest on and/or
attach to the bedrails.
ride and handling will vary depending on the size of your truck.
Handling a truck with a loaded rack on it is easier than pulling an
ATV trailer; especially on an uphill or downhill grade.
Can I carry just one ATV?
You wonít even know itís there!
What size ATVís can the rack
ATVís of any currently built make or model will fit on the rack side
by side. However, it is not designed to carry three-wheeled ATVís.
make a model to fit small or mid-size trucks?
yet. They are currently under design.
Can I have a "custom" rack
This rack system has been heavily researched and engineered.
alterations could compromise the integrity of the rack.
After ordering, how soon
will I receive my rack?
allow 3-4 weeks for delivery. We will send an e-mail confirmation to
you on the date your rack is shipped. You will then be able to track
it by the shipperís PRO number.
What about shipping?
Your Ultimate Rack
will be shipped by ABF Freight, a common carrier, and will arrive in
one container. The container will need to be picked up by you at the
ABF terminal nearest you in your geographic area. We also use
Con-Way for shipping within the Utah area. The total weight of the
container is approximately 350 pounds.
The shipping is included in
your price. If you would like your rack delivered to your
home or office, there will be an additional cost of $35.00 for
What are some of the
benefits of owning an Ultimate Rack?
Ultimate Racks are constructed of high quality materials, providing
maximum strength and durability. All open ends on the steel tubing
have been capped, welded, and ground smooth. This feature insures
that no moisture can get inside the steel tubing, so the integrity
of the rack will not be compromised.
The entire rack has been powder-coated to hold up under the harshest
of weather conditions and tolerates heat and moisture much better
than paint. Powder-coating gives much longer wear, is
chip-resistant, and looks great!
Our tire pans are a beautiful blend of functionality and appearance.
The 1/8-inch diamond-plate aluminum is rust-proof, easy to clean and
very durable. All edges have been de-burred for a smooth finish and
a superb look.
The Ultimate Rack ramps are each ten feet long and constructed of
1x3- inch tubing and 1x1x1/8-inch angle iron. They can easily bear
the weight of even the largest of ATVís. After use, the ramps are
folded and stored conveniently under the loaded ATVís, leaving the
truck bed space available for gear storage.
The Ultimate Rack is designed to complement your full-size truck!
Whether you drive a short- or longbed pickup, the Ultimate Rack
fits! If you have a longbed with a standard size toolbox, the
shortbed model works, so you can have your tools and your ATVís with
you at the same time.
6. The Ultimate Rack rests on the floor of the truck bed,
not on the
bedrails, providing more stability and evenly-distributed
weight. This feature prevents damage to your bedrails.
Your ATVís face forward when loaded on an Ultimate Rack. This cuts
down on wind resistance and prevents fender damage caused by wind.
By having your ATVís facing forward, gas mileage is improved. When
loading ATVís from the rear of the truck instead of the side, there
is no chance of accidentally driving off the other side. The
headache rack helps protect the cab and rear window.
DISCLAIMER - There
is an inherent risk involved in the use of ATV's and the loading,
unloading, and hauling of these vehicles using any carrier system.
Ultimate Racks, LLC., assumes no liability whatsoever for damage or
injury incurred during the use of this product. A helmet should be
worn during loading and unloading of an ATV on our carrier systems.
EasyMobilityCo.com suggests the use of our Heavy Duty - Trailer "able" ATV
& Quad covers with The ULTIMATE RACK
ATV / Quad
Covers - / Motorcycle Covers - / Mobility Scooter
specially designed Tilt-a-Rack covers are designed and manufactured by Diestco Mfg. Corp. for
protecting your Mobility Scooter, Wheelchair or ATV from
moisture and dirt when being stored or transported. It's durable,
but it's also lightweight and easy to handle if your mobility is
To use, simply slip
the cover over your vehicle. Secure underneath (Heavy-duty securing
system built-in) and your done!. Don't let the elements ruin your
designed covers are designed to withstand the rigors and stress of
being behind a vehicle at normal or highway speeds.
Heavy Duty Tie Down Straps
Working Load Limit - 800 lbs.
(2) 1" x 10' Ratchet Strap W/ S-Hooks
|Exclusive Abrasion Resistant Web
Tough Multi-Layer Construction
|Made for Extreme Conditions
Made in USA
Additional Ultimate Rack Products and Information:
[ Ultimate Rack Testimonials ] [
Ultimate Rack Warranty ]
Coral Springs & Odessa, FL
ORDER NOW - Toll Free: