Tilt-a-Rack Mobility Scooter and Electric Wheelchair Carriers and Racks. Tilt-a-Rack Hitch mounted / Receiver mounted easy to use Tilt a Rack Mobility Scooter and Electic Wheelchair transporters and carriers.

Tilt-a-Rack Mobility Scooter Carriers & Transporters

Mobility Scooter & Electric Wheelchair Carriers and Transporters

Mobility Scooter Carriers and Transporters. Hitch mounted solution for Electric Scooters and Electric Wheelchair transportation with your Car, Van or Truck.

Electric Mobility Scooter carrier and transportation system. Tilting rack system for behind your car, truck or van. Hitch mounted carrier system for electric wheelchairs, scooters and electric mobility scooters for your increased mobility.

The Tilt-a-Rack^® Mobility Scooter Carrier makes transporting motorized wheelchairs, power chairs and mobility scooters effortless!

It gives freedom from the discomfort and pain associated with other alternatives.

Our Mobility Scooter / Power Chair and Electric Wheelchair carrier is affordable for those who are underinsured.

Now manufactured with lightweight 6061 Aircraft Specification Aluminum, even easier to use. The strength of steel and half the weight.

Have you purchased a new automobile in the last 6 months to a year?...

You may be eligible for a reimbursement (The reimbursement amounts vary) from your new cars Manufacturer for your purchase of a Mobility Scooter lift or ramp. View details on this Auto Manufacturers programs *

* The Easy Mobility Co. is not responsible for any errors or misinformation contained on our site regarding this program. Please verify all information with your vehicles Manufacturer.

Electric Mobility Scooter and Electric Wheelchair Carriers

Wheelers know the problems associated with loading and unloading mobility scooters and motorized wheelchairs.

The disassembling process is time consuming. Lifting the heavy machinery into the trunk of a car or loading it into a non-handicap friendly vehicle is painful and inconvenient to say the least. Electric Mobility Scooter Tilt a Rack carriers are easy to use and affordable. no hydraulic lifts or expensive wheelchair or scooter lift system needed. Easy to use hitch mounted wheelchair and mobility scooter carrier and ramp.

Manufactured of Lightweight, easy to use and Heavy Duty use 6061 Aircraft Specification Aluminum.

The Tilt-a-Rack^® Scooter Carrier's - 3 easy steps to independence:

1. - Tilt the rack
2. - Load the scooter or wheelchair
3. - Level and go!

MODEL #500ARV / 350ARV / 350ARV Mini: Has a hinging device located just behind the hitch. The hinging device has three positions. Each position uses a 5/8" pin.

The first position, the primary position, keeps the rack locked in the horizontal position. The second position allows the loaded scooter rack to lift and float over dips and curbs. The third position will permit you to store the rack in a vertical position.

The new Aluminum heavy duty use 500ARV weighs only 79 lbs. and can carry up to 500 lbs. The 350ARV weighs only 58 lbs. and can carry up to 350 lbs. The 350ARV Mini weighs only 49 lbs. and can also carry up to 350 lbs.

The model #500ARV, 350ARV & 350ARV Mini mechanism allows the loaded Scooter Rack to lift and float over dips and curbs. It also stores in a vertical position when not in use.

FREE SHIPPING OF ALL OUR RACKS IN THE CONTINENTAL U.S.

Model #500 ARV - $750
Model #350 ARV - $675
Model #350 ARV Mini - $589
Model #350ARV and 500ARV Light Kit - $30

Tilt-a-Rack Mobility Scooter Carrier Features:

Our Tilt-a-Rack^® Scooter Carrier is easy to install and use. There are no electronic components that might fail. Operates by a natural force—gravity! Those who can operate an electric lift and drive can also use this carrier with ease. Gravity and balance work for you!

The leveling bolt on the frame beneath the platform keeps the carrier level for each type of vehicle and levels the center of gravity of the many types of chairs and scooters.

The tilt feature eliminates the need for ramps. With the flip of a latch, the rack tilts easily toward the passenger side. It conveniently reaches the curb for parallel parking.

The deck extender pulls out from beneath the scooter, reducing the angle of incline. This feature is especially helpful when a handicap curb is not available.

The two set bolts eliminate the minute movement of the hitch bar when inside the hitch receiver. They are tightened to the face of the receiver immediately after you attach the carrier to your vehicle.

View a photo gallery of larger Tilt-a-Rack Scooter Carrier images

At The Easy Mobility Co., we wish to provide some of the conveniences that wheelers deserve. The trials and tribulations involved with being disabled or partially disabled should not be taken lightly.

It is our goal to develop durable, user friendly, and affordable products. The Tilt-a-Rack^® Scooter Carrier will give you many years of convenience and dependability.

View Assembly Instructions for our Tilt-a-Rack Mobility Scooter & Power Chair Carriers

You may also view, download and print our Tilt-a-Rack Mobility Scooter & Power Chair Carrier Brochure as an Adobe pdf document by clicking on the following link..
Tilt-a-Rack Mobility Scooter Carrier Brochure

Tilt-a-Rack Features

MEDICAL TILT-A-RACK CARRIER SPECIFICATIONS
Model	Max Load	Usable Dimensions	Receiver Class	Unit Weight	Shipping Weight
Mobility Scooter Carrier for the smaller Travel Scooters, Power Chairs and Wheelchairs
350ARV Mini	350 lbs.	44"x22"	II & III	46 lbs.	50 lbs.
Mobility Scooter Carrier for the mid-sized Scooters and Power Chairs
350ARV	350 lbs.	52"x26"	II & III	58 lbs.	62 lbs.
Mobility Scooter Carrier for the full-sized Scooters and Power Chairs
500ARV	500 lbs.	60"x32"	II & III	80 lbs.	85 lbs.
500ARV Plus	500 Lbs.	63"x38"	III or Greater	100 lbs.	105 lbs.

Class II Height Adjuster - $150.00
Class II Hitch Bar - $99.00
Class III Height Adjuster - $150.00

Click here to view the Height Adjuster instructions diagram

New Products - Silent Hitch Pin:
Keeps ball mounts, cargo carriers and bike racks quiet and rattle free!

Click on the image to view it as a larger image in a separate window.

Model #Silent Hitch Pin - $30.00

FREE Ground SHIPPING in Continental U.S. - No Sales tax outside of Florida

Heavy Duty Tie Down Straps

Working Load Limit - 800 lbs.

Commercial Grade

(2) 1" x 10' Ratchet Strap W/ S-Hooks

Exclusive Abrasion Resistant Web

Tough Multi-Layer Construction

Made for Extreme Conditions

Made in USA

Additional Tilt-a-Rack Products and Information:

The Easy Mobility Company
8973 Taft Street, Pembroke Pines, FL 33024
ORDER NOW - Toll Free: 1.877.432.EASY (3279)
Phone: 954.432.7970
Fax: 954.432.7930
Email: sales@easymobilityco.com