KEEGANBAR
Information
The
KEEGANBAR
is a patented product that allows you to effectively tow an ATV in
several different ways including with another ATV. The
KEEGANBAR
is also very simple to use: In less than a minute, you can attach a
KEEGANBAR
to your ATV and to the towing vehicle.
This is important if your ATV malfunctions, runs out of
gas or a driver can't continue to drive his ATV due to an illness or
accident. Imagine being deep in the woods or in your hunting grounds
and any of these situations come up. By using the
KEEGANBAR
system you can bring home the second ATV and the extra driver too.
You can do all this without using chains or ropes!
You can also tow two ATVs with our specially designed Twin Ball
Bar, behind your automobile or any hitch mounted vehicle. This is
the easiest way to move an ATV if you are by yourself. The
KEEGANBAR
allow you to tow your ATV without the need of a pickup truck, heavy
lifting, a more expensive loading ramp or oversized trailer.
Click here to view our Streaming Video
of the KEEGANBAR products in use.
Unique features:
The
KEEGANBAR
is made of high strength aluminum and has been tested and used for
over 10 years
The
KEEGANBAR
currently fits those ATV models with a round front grill bar with a
diameter of up to 1.5". Most Honda ATV's have a 7/8" round bar which
attaches perfectly to the
KEEGANBAR.
Special Instructions:
- It is the responsibility of the owner to know and follow all
local, State and Federal laws when operating a motor vehicle and
towing an ATV. Some jurisdictions may impose additional towing
regulations such as the use of tail lamps and safety chains.
- The
KEEGANBAR
was designed and tested for most road conditions.
-
Do not exceed speeds of 45 MPH when towing your ATV with a
KEEGANBAR.
- Do not use the
KEEGANBAR
to tow your ATV on highways where the minimum speed limits
are 45 MPH.
- ATV tires are not constructed for driving on the street or
pavement. Most low pressure tires will wear quickly on these
surfaces due to the weight of the driver, spinning of the tires, and
hard turns. The
KEEGANBAR
allows for towing of your ATV without adding additional stress to
your tires.
- Never ride on an ATV that is being towed.
- Periodically check all bolts and nuts to ensure that they are
tight and not damaged. Replace any as required.
- It is the responsibility of the owner to read and understand all
the instructions before using the
KEEGANBAR.
- There are no distance limitations when towing in off road
conditions.
KEEGANBAR
FAQ's
What if my ATV has a bar bigger than 1.5”?
At the present time the
KEEGANBAR
will only fit on an ATV with a 1.5” bar. However, there is a new
accessory that should be available soon, which will allow various
larger size bars.
Do I need any permits even if I’m
using the
KEEGANBAR
off-road?
We have conducted research into this
area and found that most states do not have regulations for this. We
recommend that you check with your local DMV office for further
clarification.
How do I tow an ATV with another ATV?
This is our best feature! In addition to the
KEEGANBAR,
you will need to purchase an accessory called the Ball Spacer, also
sold on our web site.
Simply install the Ball Spacer on the back of an ATV (image 1)
and then connect the
KEEGANBAR
to the Ball Spacer and to the ATV you want to tow (image 2).
Image 1-
Image 2 -
No more ropes and chains…
How fast can I tow an ATV?
We recommend you do not tow over 45 mph.
How do I carry the
KEEGANBAR
while riding?
You can use the ‘steering straps’
that come with the product to tie it down to the body of the ATV
(racks, etc.). See picture below
This patented ATV towing device is very simple to
install and makes it possible to tow your ATV or Quad. in the most
convenient and economical way.
Click here to view our Streaming Video
of the KEEGANBAR products in use
